Fiserv FD150 Full download Instructions

Full Download Instructions

1. Plug in the power and Ethernet cable into the yellow port on the terminal (do not connect the PIN pad yet).
2. Press 4 and the Enter (green) button simultaneously.
3. Enter the password 990712.
4. Select Exit to OS, then enter the password 990712 again.
5. Go to Setup, enter the password, and select Erase.
6. Navigate to Download > Port > IP and press Enter, then select Save.
7. Choose File and enter the TID (contact Client Services for this number), then select Save & Enter.
8. Select Run to start the download process.
9. When the terminal displays Transmission Complete, the download is finished.
10. Press the Red button twice, then unplug the terminal. Wait about 10 seconds, reconnect it, and plug in the PIN pad.
11. The terminal will reboot and should automatically pull a table load. If not, follow the instructions for a table load below.
12. The terminal is now ready to process transactions.

Table Load Instructions

1. Tap the orange wrench icon in the upper right corner.
2. Go to Settings > Credit > Parameters > Parm INIT > Table load.